Jb-lighting Licon FX Bedienungsanleitung

User manual Version 1.1

12.02.2010 V1.0 -10-1.2.4 Technical specification Design:  512 DMX channels in total  96 dimmers  16 chases may be active simultaneou

12.02.2010 V1.0 -11-Press the ESC key to select submenus further down in the menu structure. Softkeys in the menu bar of the display, wh

12.02.2010 V1.0 -12-A reset of the user profiles must be carried out separately by pressing the softkey ACCES. This process will also re

12.02.2010 V1.0 -13-In this submenu you can toggle between the stand-alone mode of the Licon FX as fader console and the extension mode

12.02.2010 V1.0 -14-Enter the TOOLS-REMOT menu of the Licon 1 and press the softkey L-FX to activate the remote mode of the Licon FX (me

12.02.2010 V1.0 -15-After loading of backup data, the consoles are automatically resynchronised, if necessary. The Licon FX will automat

12.02.2010 V1.0 -16-In order to assign a key to a channel, press the corresponding key on the console. To assign one of the display keys

12.02.2010 V1.0 -17- The Licon FX comes with a MIDI input on the rear panel of the console, to which you may connect a MIDI keyboard or

12.02.2010 V1.0 -18- On the upper left of the patch display in the field “SEL:...“ you will see the currently selected console channel o

12.02.2010 V1.0 -19- 3.3.1 Manual fade The Licon FX allows you to use the chase faders in order to perform manual fades. -> For quick

12.02.2010 V1.0 -2-

12.02.2010 V1.0 -20- As illustrated above, the menu item COMB 1 must be displayed inverted and AUTO 1 must not be displayed inverted. If

12.02.2010 V1.0 -21-shown. Now press the softkey SET to configure the user profiles. The following submenu is shown: The heading names

12.02.2010 V1.0 -22-4 Basic control elements 4.1 Storage elements The Licon FX comes with two elements for the management of self-progra

12.02.2010 V1.0 -23- Take into consideration the following aspects while you are programming cues or chases: The submaster faders of the

12.02.2010 V1.0 -24-Section B bank C fader 1  page 1 bank C cue 1 ... Section B bank D fader 1  page 1 bank D cue 1 It is possible to

12.02.2010 V1.0 -25-4.5.3 Changing chase parameters with elements of the control section How chase parameters are changed with elements

12.02.2010 V1.0 -26--> For quick start guide continue with 6 Chases 5.3 Changing cue parameters 5.3.1 Changing the name -> You can

12.02.2010 V1.0 -27-Finally, the line below shows the speed of the chase in the AUTO mode expressed either in seconds or hertz. The spee

12.02.2010 V1.0 -28--> For quick start guide continue with 6.4 Modifying chase parameters 6.3.2 Modifying steps Press the softkey MO

12.02.2010 V1.0 -29-The following two parameters are distinguished here: Parameters that can only be modified when the STORE or EDIT men

12.02.2010 V1.0 -3-

12.02.2010 V1.0 -30-6.4.3 Changing flow control -> The parameter flow control can be changed both in the STORE or EDIT mode and by di

12.02.2010 V1.0 -31-the measurement of the desired frequency (LED stops flashing) and the new chase frequency will be adopted. 6.4.3.2 M

12.02.2010 V1.0 -32-the fader extension mode to the Licon 1/1X, use the Sound In input on the rear panel of the Licon 1/1X. The frequenc

12.02.2010 V1.0 -33- Activate this mode paying attention to the LEDs of the control section mentioned above. As can be seen in the illu

12.02.2010 V1.0 -34-If you wish to reset the chase to the first step, select the chase in the control section (see 4.5.1 Assigning the c

12.02.2010 V1.0 -35-6.4.5 Changing direction -> This parameter can be changed both in the STORE or EDIT mode and by direct selection

12.02.2010 V1.0 -36-Use a customary USB memory stick formatted with the FAT 32 file system for backup of the Licon FX console data. As a

12.02.2010 V1.0 -37-The softkey MEMO is used for backup of all cue and chase data as well as the fader assignments. The corresponding ba

12.02.2010 V1.0 -38- Select the desired file format and the following display is shown: This submenu exclusively displays files with th

12.02.2010 V1.0 -39-7.8 Displaying serial number and software version Press the softkey INFO to call up the serial number of the console

12.02.2010 V1.0 -4- Foreword Congratulations on your purchase of the Licon FX lighting console. The company JB-Lighting would like to

12.02.2010 V1.0 -40-Then perform the test according to the sequence of the above list by moving the respective controllers first to the

12.02.2010 V1.0 -41-We will e-mail these updates to the Licon FX customers that are included in our mailing list. If you wish to be incl

12.02.2010 V1.0 -42-The transfer of the update file to the Licon FX will take approximately one minute.

12.02.2010 V1.0 -43-9 Index of keys and softkeys < <<< ... 10 > >>&

12.02.2010 V1.0 -44-LIC 1 ... 12 LIC 1X... 13

12.02.2010 V1.0 -5-Table of contents 1 First steps ...

12.02.2010 V1.0 -6- 6.3.2.1 Deleting steps ... 28 6.3.2

12.02.2010 V1.0 -7-1 First steps 1.1 The user’s manual The user’s manual comes with an integrated quick start guide that will allow you

12.02.2010 V1.0 -8- 1.2.2 Control elements on the front panel

12.02.2010 V1.0 -9-1.2.3 Control elements on the rear panel