Jb-lighting Varyscan P8 Bedienungsanleitung PDF herunterladen (Seite 37)

- 37 -

COOLING MODE

The P8 offers three different modes for fan opperation. The default setting STANDARD will suit

most applications. Switch to SILENT to reduce the speed of the fans to a minimum. This mode

is to be used only a well ventilated rooms with low ambient temperature, with reduced light out-

put or if the xture is only required occasionally. The HI POWER mode is designed to be used in

areas with higher air temperature or for xed installtions. The fans start to run faster with more

airow which produces more noise.

There is in no mode danger for the lifetime of the P8. If the temperature rise to much the xture

switches off automatically.

WLJB DMX HOLD

The behavior of the P8 in case the Wireless DMX connection is interrupted can be set to:

1. DMX Hold - P8 freezes on the last received DMX value.

2. Fade out - P8 fades out after 5 seconds.

When DMX signal is back the P8 rst turn to its new position and fades in.

5.6 STANDALONE mode

A sequence, up to 20 steps, consisting of preprogrammed cues can be recalled by means of

the STANDALONE MODE. The sequence will run as a loop. Cues can be entered in two different

ways. The rst way is to program every feature by means of the key of the units onboard control

panel. The second way is to program the cues by means of a connected DMX control console

and to store them in the xture.

IMPORTANT! The functions MODIFY, RUN and REMOTE can be accessed only by pressing a

combination of keys and not just by pressing „ENTER“. Before activating the functions make

sure that there is just one DMX-transmitter in the DMX-line (e.g. one control console or one

master xture). A number of DMX-transmitters can damage the DMX driver of the xtures. To

enter the functions press “ENTER” (keep it down) and press „ESC“ in addition.

Programming the stand alone sequence:

Enter the menu STANDALONE -> EDIT. STEP NR 01/01 will be displayed. Enter the MODIFY

menu to get access to the xtures functions. Recall the functions and enter DMX values. Enter

FADE TIME (during which the effects will move to the programmed position) Enter NEXT TIME

which will be the duration of the step. Add a new step with INSERT. The DMX values of the last

step will be automatically copied to the new step. With DELETE one step of the sequence can

be deleted. Choose the step and conrm the function with ENTER. To reset the DMX values of a

step use RESET STEP. Select the step and conrm with “ENTER”. All DMX values of the step will

be set to zero. With CLEAR ALL the complete sequence will be deleted and the display will show

STEP 01/01

Store cues from a DMX controller:

The DMX values can also be programmed by means of a DMX console. Enter the STANDALONE

menu and navigate to CAPT DMX. Programm the DMX values with an external DMX console.

To capture the data press „ENTER“. The xtures display will show START CAPTURE. To insert,

delete or reset use the keys of the control panel of the xture.

Activate the standalone mode:

The standalone mode is activated in the menu STANDALONE -> RUN. To enter the functions

press “ENTER” (keep it down) and press “ESC” in addtion. P8 will execute sequence in a repea-

ting loop. To leave press “ESC” and hold it down and press “ENTER” in addition.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Jb-lighting Varyscan P8 Bedienungsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Jb-lighting Varyscan P8